Locking mailbox The manufacturer tells you that the community mailbox can be said to be a must in our modern community, and it has become a necessity in our lives. Locking mailbox manufacturers tell you that modern mailboxes are no longer like old-fashioned iron boxes. People can use them to receive letters and bills, which are indispensable in our lives. Therefore, we must be clear about the experimentation, maintenance and protection of mailboxes.

The manufacturer of the Locking mailbox tells you to be careful when installing it. A professional installer will do the work for you. After you put it into the application, you must pay attention to cover it. Never hit it with hard objects to prevent it from being deformed and scratched by collision. The Locking mailbox manufacturer tells you that you cannot use sharp objects like knives to scratch it. This is very inaccurate.
1. The manufacturer of the Locking mailbox tells you to pay attention not to scratch the surface of the mailbox. Do not use rough and sharp materials to scrub the surface of the stainless steel mailbox, especially the mirrored one. Use a softer, non-shedding cloth to scrub, sand steel And brushed surface, wipe along the lines, otherwise it is easy to make the surface dirty.
2. The Locking mailbox manufacturer tells you to avoid using detergents, steel wire balls, abrasive tools, etc. containing bleaching ingredients and abrasives. To avoid residual detergents from corroding the surface of the stainless steel mailbox, rinse the surface with clean water at the end of the wash.
3. If there is dust and dirt on the surface of the stainless steel mailbox, it can be washed with soap or weak washing. The binder component should be washed with alcohol or organic solvents (ether, benzene).
4. The locking mailbox manufacturer tells you that the grease, oil, and lubricating oil on the surface of the stainless steel mailbox should be cleaned with a soft cloth, and then cleaned with a neutral detergent or ammonia solution or a special detergent.
5. The manufacturer of the Locking mailbox tells you that there are bleaching agents and various acids attached to the surface of the stainless steel mailbox. Rinse immediately with water, then soak with ammonia solution or neutral carbonated soda solution, and wash with neutral detergent or warm water.
6. The Locking mailbox manufacturer tells you that there are rainbow patterns on the surface of the stainless steel mailbox, which is caused by excessive use of detergent or oil. It can be washed away with warm water during washing.
7. The locking mailbox manufacturer tells you that rust caused by dirt on the surface of stainless steel mailboxes can be washed with 10% nitric acid or abrasive detergent, or with special detergents. As long as we use the correct maintenance method, we can extend the service life of the stainless steel mailbox and maintain its clean, bright and gorgeous style.
The above are some precautions for using the mailbox, I hope it will be helpful to you.